1. When installing the 30w-100w All In One Solar Street Light, handle it with care as much as possible. Collision and knocking are strictly prohibited to avoid damage.
2. There should be no tall buildings or trees in front of the solar panel to block the sunlight, and choose an unshaded place for installation.
3. All the screws for installing the 30w-100w All In One Solar Street Light must be tightened and the locknuts must be tightened, and there must be no looseness or shaking.
4. Since the lighting time and power are set according to the factory specifications, it is necessary to adjust the lighting time, and the factory must be notified for adjustment before placing an order.
5. When repairing or replacing the light source, lithium battery, and controller; the model and power must be the same as the original configuration. It is strictly forbidden to replace the light source, lithium battery box, and controller with different power models from the factory configuration, or to replace and adjust the lighting by non-professionals at will. time parameter.
6. When replacing internal components, wiring must be strictly in accordance with the corresponding wiring diagram. The positive and negative poles should be distinguished, and reverse connection is strictly prohibited.
