Floodlights have a wide range of illumination and can be evenly illuminated in all directions. They are often used on billboards, roads, railway tunnels, bridges and culverts and other places. So how to set the installation height of the floodlight? Let’s follow the floodlight manufacturer TIANXIANG to understand.
What is the installation height of Ip66 30w floodlight?
1. Generally, the installation height of sports flood lighting is 2240~2650mm from the ground, but it can be closer, about 1400~1700mm. The distance from the floodlight to the wall is about 95 ~ 400mm.
2. The installation height of wall lamps in corridors and corridors should be slightly higher than the eye level by about 1.8 meters, that is, 2.2 to 26 meters from the ground.
3. For the floodlight in the working environment, the distance from the desktop is 1.4~1.8m, and the distance from the floor of the floodlight in the bedroom is about 1.4~1.7m.
How to install LED floodlights?
1. Install guardrails and punch holes on the wall. The spacing is generally within 3 cm according to actual requirements;
2. Do a good job of anti-static measures, such as grounding the workbench, workers wearing corresponding static clothing, and anti-static measures, because different grades of LED floodlights have different quality and different anti-static capabilities;
3. Pay attention to the airtightness of the installation, the airtightness is not good, the diameter affects the service life of the LED floodlight;
4. Sports flood lighting wiring is best not to exceed 25 cm, and the power of the transformer can be lengthened accordingly, otherwise the brightness will be affected.
What should I pay attention to when installing Floodlight 100 deg 30w?
1. Before installing the Floodlight 100 deg 30w, you need to prepare the LED guardrail light clip, the transformer with waterproof function, the sub-controller and other related components.
2. The spacing between Floodlight 100 deg 30w clips should be within 3 cm.
3. Before installing the Floodlight 100 deg 30w, people must take anti-static measures, such as grounding the workbench, and wearing anti-static clothing for the master, and anti-static measures.
4. The installation of Floodlight 100 deg 30w should pay attention to its sealing. If the sealing is not good, the service life of the floodlight will be reduced.
5. The wiring of Floodlight 100 deg 30w cannot exceed 25cm, but its transformer power can be increased, otherwise the brightness of the lamp will not be enough.
Ip66 30w floodlight scope of application
1. Widely used in dangerous environments such as oil exploration, oil refining, chemical industry, as well as offshore oil platforms, oil tankers and other places for general lighting and operational lighting;
2. It is suitable for energy-saving renovation projects and places where maintenance and replacement are difficult;
3. It is suitable for places with high protection level and humid places.
If you are interested in Ip66 30w floodlight, welcome to contact floodlight manufacturer TIANXIANG to read more.
Post time: Apr-06-2023