Now many families are using split solar street lights, which do not need to pay electricity bills or lay wires, and will automatically light up when it gets dark and automatically turn off when it gets light. Such a good product will definitely be loved by many people, but during the installation or use process, you will encounter headaches such as the solar light not lighting up at night or lighting up all the time during the day. So today, street light manufacturer TIANXIANG will teach you a few tips. If you learn it, it will only take 3 minutes to solve the common problems of split solar street lights.
Before installing split solar street lights, it is very important to test them to ensure their normal operation and safety. If you do not test them, if you find that the lights are not on after installation, it will greatly increase the cost of maintenance and replacement. The following are the test steps that should be performed before installation:
1. Cover the photovoltaic panel with the ground or cover the photovoltaic panel with a cover,
2. Press the power button to turn it on, and wait for about 15 seconds for the light to light up,
3. After facing the solar photovoltaic panel to the sun, the street light will automatically turn off. If it automatically turns off, it means that the solar photovoltaic panel can receive sunlight and charge normally.
4. The solar panel should be placed in a sunny place to observe whether it can generate current. If it can generate current, it means that the lamp can receive sunlight and charge normally. The above test steps can ensure that the split solar street light can operate normally after installation and provide stable and reliable lighting effects.
When testing the street light, you need to pay attention to the following matters:
1. Before testing, you need to confirm whether the main components of the street light are intact, such as solar panels, batteries, lamp poles and controllers.
2. When testing the lighting of the street light, you need to use some shielding tools, such as cotton cloth or other items, to shield the solar panel.
3. If it is found that the street light cannot work properly during the test, it is necessary to promptly investigate the cause of the fault and repair and maintain it in time. If the solar cell is aging, you can consider replacing it with a new solar cell with stronger charging capacity.
4. Be sure to follow the operating instructions during the test to avoid misoperation that causes the street light to fail to work properly.
5. During the test, you need to avoid touching the wires or cables with your hands to avoid electric shock and wire damage.
FAQs
Q1: split solar street lights do not light up at night
Detection method: Check whether the connection wires between the controller and the LED light source are properly connected.
(1) The connection wires between the controller and the LED light source must distinguish the positive and negative poles, and must connect positive to positive and negative to negative;
(2) Whether the connection wires between the controller and the LED light source are loosely connected or the line is broken.
Q2: split solar street lights are always on during the day
Detection method: Check whether the connection wires between the controller and the solar panel are properly connected.
(1) The connection wires between the controller and the solar panel must distinguish the positive and negative poles, and must connect positive to positive and negative to negative;
(2) Whether the connection wires between the controller and the solar panel are loosely connected or the line is broken;
(3) Check the junction box of the solar panel to see if the positive and negative terminals are open or broken.
Post time: Mar-13-2025